Trailer and Electric Winches
Winches
Videos
for Winches
Help Articles
for Winches
Expert Answers
for Winches
To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…
view full answer...Yes, the Buyers Products Over-The-Cab Truck Bed Ladder Rack #3371501150 will fit great with the 6-1/2' bed on your 2019 Ford F-150. Attached is an installation video as well as a photo of this installed on a 2016 F-150 so you can get an idea…
view full answer...It is plastic. The ComeUp UW-5000si Trailer Winch item #CU645010 is a light duty winch so it's housing and base are made of plastic. I attached a picture below that will show you the base. I've also linked an installation video that…
view full answer...The 2x2 inch square axle is likely 3,500 lbs or less capacity. I would need more spindle dimensions or bearing numbers to assist. If you pull a hub and measure at the spindle where the bearings and seal ride using the digital caliper like #PTW80157…
view full answer...The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL88204 will fit with your lifted 2018 GMC Sierra 1500 but you might need to add a spacer kit if you had to lift the back of your truck. Since you didn't…
view full answer...Depending on how the trailer was made, there will be a few spots you can check to identify the axle. First, if the trailer was pre-made by a specific company, you may be able to find this information in either the paperwork or on a placard somewhere…
view full answer...For 32 inch J-hook windshield wiper blade the best option is the Wiper Technologies J Hook Windshield Wiper Blade #WPR46FR. The #WPR46FR super easy to install as they just slide into the J-hook. This wiper is a frame style, which means it conforms to…
view full answer...The 8-14.5 tires are an older metric size no longer used today. Therefore, you would need to replace these along with the wheels in order to update them. In order to see if we have any options for you, we'd first need to determine the bolt…
view full answer...The hub bore diameter close to the base of the Dexter Trailer Idler Hub Assembly for 6,000-lb Axles #42655UC1 is just over 3-1/2". Please note that the hub you're asking about is a lug-centric hub which means it has the studs in place and…
view full answer...Yes, I was able to verify with Curt their Front Mount Trailer Hitch Receiver #C31078 will fit your 2024 Ford F-250 4 wheel drive.
view full answer...The only difference between the Demco Channel Tongue Trailer Coupler part #12564 and Demco Channel Tongue Trailer Coupler part #DM12717 is the bolt pattern which is just slightly different with one having an extra hole.
view full answer...The Superwinch S5500 Trailer Winch #SW1455200 mounting bolt holes are separated apart by 3-3/4" on center (see attached photo). Attached is a review video for you to reference as well.
view full answer...